Modeling Precast Structures
Modeling precast reinforced concrete structures in StatiCAD: general workflow, parametric precast sections, nonprismatic beams, pinned connections, rigid diaphragm and the TBDY Annex 8B equivalent braces for the roof diaphragm.
Defining a Nonprismatic Beam
Step-by-step definition of a beam whose section varies along its length (nonprismatic): end and middle sections, the Nonprismatic Section Definition window, assigning it to a beam and changing properties, self-weight and stiffness, reinforcement, moment and shear checks, the beam development drawing and comparison with SAP2000.
Overhead Crane Loads, Additional Seismic Masses and Different R–D
Entering façade panel and crane masses as additional seismic mass in precast buildings, writing overhead travelling crane loads to the columns as separate load cases and the crane combinations, and different R and D for the upper and lower parts according to TBDY 4.3.6.
Precast Connection Design (TBDY Chapter 8)
Pinned (MFB), wet-on-top / welded-at-bottom moment-resisting (MAB3), purlin and gutter beam connections, façade panel seismic load and foundation sliding; taking demands from the analysis, reinforcement, moment and shear design of polygonal and nonprismatic beams, and reporting.
Short Corbel Design (TS 500 Clause 8.4)
Design of precast column corbels according to TS 500 Clause 8.4: the Corbel tab of the column properties window, taking the demand from the analysis (seated beams, predefined node, overhead travelling crane), calculation basis, reinforcement selection, result statuses and the KONSOL rows in the report.
Precast Structures Verification Studies
Verification of the precast features: unit tests of the nonprismatic member, comparison of precast sections with SAP2000, numerical examples of the Turkish Precast Association example building, the short corbel calculation, and independent finite element comparison with SAP2000 v27 (including the nonprismatic beam).
Worked Example: Precast Industrial Building
End-to-end solution of the Turkish Precast Association example industrial building in StatiCAD: project settings, precast and nonprismatic sections, pinned connections, Annex 8B braces, additional masses, crane, different R–D, analysis, comparison with the book, connection design, report and drawings.