File Save/Open Problems
1-To open an existing file in the program, you must first launch the program and then use the Open File command from within it to open your existing project. If your program does not open, make sure the dongle is plugged in and check the installation steps at the link below.
OUT OF SYSTEM RESOURCES Error
In some large projects, an OUT OF SYSTEM RESOURCES error may occur when performing calculations with finite elements. Solution Suggestions: 1-Including slabs in the system sti
Antivirus Warning Occurring
Your antivirus program may sometimes (after an antivirus update) delete the .exe file and setup file of the StatiCAD program. In such cases, you should add
Dongle Problem
First Launch: The dongle must be attached and the dongle drivers must be installed for the program to run. The driver files are downloaded from the user panel
Run Error
The problem may be caused by your antivirus program blocking the application. Temporarily disable your antivirus software and try again. If the software runs
Font Display Problem
If you cannot see text in PDF or calculation reports, download the font file (ARIALUNI.TTF) from the link https://www.staticad.com/download/ARIALUNI.TTF and paste it into the C:\Windows\Fonts folder.
Unable to select objects on screen or unable to draw on screen
The inability to select objects on screen or to draw on screen is usually caused by a zero-length or zero-width element having been drawn. Far