Mouse Right-Click Menu
Move Selected Elements onto the Selected Grid Line. If the number of selected grid lines is 1 and there are selected elements, the Move Selected Elements onto the Selected Grid Line option becomes active in the right-click menu.
Creating a Grid Inside Selected Walls
A practical method with step-by-step instructions for creating grid elements (edge studs, intermediate studs, top chord beams, band beams, bottom chord beams) inside selected timber shear walls.
Create Rib/Grid on Selected Slab
In a structure whose floor plan is as shown in the image below, let us create a timber slab system where slabs 1 and 4 have the main beam direction in the X direction, and slabs 2 and 3 have the main beam direction in the Y direction.
Multiple Copy
Multiple Copying of Selected Elements Within the Same Storey in StatiCAD. Copying elements multiple times at a specified interval can significantly reduce modelling time.
Applying Vertical Slope to Selected Elements
Applying Vertical Slope to Selected Elements with StatiCAD — If you need to apply a slope to certain elements on a storey, such as a roof storey, the slope can be assigned by changing the right and left elevation values of the elements.
General Storey Settings
Adding, deleting, renaming storeys, changing output index, changing storey height, and specifying the live load participation factor for a storey in your project
Multiple Property Modification
To change the properties of multiple elements on a storey at once; select the elements whose properties you want to change, perform the selection by
Copy Storey
After creating storeys in your project, navigate to the storey you want to copy. The element types to be copied are related to which types of elements will be copied to the target storey.
Command Line
The commands available in the command line added with the version 9.0.4.0 update are listed below. Type W or w or wall or shear wall in the command line and